Projects
Recent underfloor heating installations by the Constant Hot Water team.
A closer look at recent underfloor heating installations completed by the Constant Hot Water team. From individual rooms to larger renovation and building projects, every installation is planned around the property and the work taking place.
-
Wet underfloor heating across a large room, ready for screed
A full width wet underfloor heating circuit laid across a large lower level room. Foil faced insulation lines the walls, the floor is built up over insulation and a membrane, and continuous pipe has been clipped in a tight even pattern with edge insulation around the perimeter, set out and ready for the screed.
-
Overlay underfloor heating in a glazed garden room
A low profile overlay wet system running through a glazed garden room and into the adjoining space. Grooved insulation panels are laid over the existing floor and the pipe is pressed into the routed channels, so the finished floor level barely changes. A good approach where digging out for a deep screed is not practical.
-
Underfloor heating in a contemporary extension
A wet in screed underfloor heating installation in a modern extension with full height sliding glazing onto the garden. Continuous pipe is clipped over insulation in a close even pattern across the whole floor, with blue edge insulation around the perimeter, laid ready for the screed.
-
Underfloor heating in a ground floor extension
A wet underfloor heating circuit in a ground floor extension still under construction. Blockwork walls are up to damp proof course, the floor is built up over insulation and a membrane, and pipe is clipped in a wide even pattern with the layout marked out on site, set out ready for screed.
-
Underfloor heating at first fix on a building project
A wet underfloor heating circuit run across several rooms at first fix stage. Timber stud partitions and blockwork are up, first fix plumbing is in, the floor is built up over insulation and membrane, and continuous pipe is laid in flowing loops from room to room, ready for screed.
-
Low profile overlay underfloor heating fitted in an existing home
A low profile overlay wet system fitted through the hallway and rooms of an existing, already plastered house. Grooved foil faced panels sit on the existing floor and small bore pipe is pressed into the channels, carrying the circuit through doorways from room to room with very little change in floor height.
-
Wet underfloor heating installed between timber joists
This wet underfloor heating system was installed between timber joists across several connected areas of an existing property. The photographs show the pipework fitted neatly within the timber floor structure before the final floor finish was installed.
Planning underfloor heating? Let’s talk it through.
Tell us about the project and we’ll come back to you with what we need to know and where to go next.